Table of Contents
Rotate & Transform
This feature allows for the manipulation of object orientation, ranging from simple 2D spins to complex 3D perspective distortions.
This option is located within the Object Design Menu (bottom).
Total Launcher distinguishes between two types of manipulation:
- Rotate: Spins an object on a flat 2D plane (Z-axis), similar to turning a piece of paper on a desk.
- Transform: Manipulates objects in 3D space, changing spatial geometry and perspective.
The Interface (Modes)
The behavior of the adjustment sliders depends entirely on the selected Mode. The screen is controlled by a radio button toggle:
| Θ Rotate | Θ Transform |
 |  |
- Select Rotate to adjust angles (Degrees).
- Select Transform to adjust spatial position and distortion (Size/Depth).
Manual Entry: Tap any slider icon once to open the numeric input dialog. This allows you to type exact values for precise alignment.
Rotate Mode (Angles)
When the Rotate radio button is selected, the sliders control the angle of the object along three axes.
| Slider | Axis | Technical Action | Visual Effect |
|---|---|---|---|
| Top | Z-Axis (Roll) | Spins the object around its center point. [-180 to +180] | Clockwise Spin: The object rotates on the flat 2D plane of the screen like a clock face. |
| Side | Y-Axis (Pitch) | Pivots the object around its horizontal center. [-180 to +180] | Tilt Forward/Back: The object tilts into 3D space; the top appears further away and the bottom appears closer to the viewer. |
| Bottom | X-Axis (Yaw) | Pivots the object around its vertical center. [-180 to +180] | Swing Left/Right: The object rotates horizontally; one side is pushed back while the other is pulled forward. |
Pivot Point: All rotations occur around the object's center point. You cannot currently change the anchor point to the edge (e.g., to make a door swing from its hinges).
Note: If the object looks “flat” (skewed) rather than 3D after rotating the X or Y axis, check the Perspective settings in the main launcher options. Without perspective, 3D rotations appear as simple 2D skewing.
Transform Mode (Distortion)
When the Transform radio button is selected, the sliders control the size, position, and 3D depth of the object.
| Slider | Function | Technical Action | Visual Effect |
|---|---|---|---|
| Top | Scale | Uniform scaling/compression. [+10 to +100] | Zoom: Increases or decreases the overall size of the object. |
| Side | X-Position | X-axis translation. [-200 to +200] | Shift: Moves the object's anchor point along the horizontal plane (e.g., lower-left). |
| Bottom | Z-Depth | Magnification/Proximity. [-200 to +200] | Perspective Depth: massively enlarges or skews the object, stretching it toward the viewer as if moving the camera closer. |
Scale vs. Resize: The Scale slider (Top) adjusts the visual zoom of the object content, distinct from changing the object's bounding box on the grid.
Critical Rule: The "Rotate First" Requirement
Rule: Rotation is Prerequisite
A rotation must be applied first for the transform (depth) effect to become visible.
Increasing the Transform (Z-Depth/Perspective) slider without changing the Rotate (Angle) causes the object to appear squished or resized rather than 3D.
Correct Sequence for 3D Effects:
- Switch to Rotate Mode and move the Side or Bottom slider to establish an angle.
- Switch to Transform Mode and increase the Bottom (Z-Depth) slider to generate depth.
Compatibility & Limitations
Not all objects support 3D manipulation.
| Object Type | Rotate? | Transform? | Notes |
|---|---|---|---|
| TL Objects (Text, Image, Shape) | Yes | Yes | Fully supports 3D manipulation. |
| App Widgets (Gmail, Calendar) | Yes | No | Do not use Transform. Android restricts widgets to 2D rectangles; the effect will fail or look like a resize. |
| Groups | Yes | Yes | Workaround: If an object will not transform, place it within a Group and apply the transform to the Group container. |
Group Warning: A transformed object, if added to a group *after* being transformed, will lose its transformation settings.
Troubleshooting
If the Transform tool appears inactive:
- Verify Angle: Ensure the Rotate X or Rotate Y slider is not set to 0.
- Verify Object: Confirm the target is not a standard Android App Widget.
Comments & Feedback
Toby Lancer is ready to help! Look for the Quick Help form:
► Desktop: left sidebar located near the bottom for Private to Admin
► Mobile: 3-bar menu at page top.
► Use the Discussion section below to share any experiences and communications with other Total Launcher users.
► Any Registered User can directly update this and any wiki page if desired.
Moderation: To keep the manual clean, all comments are held for appropriateness review. Preview any comment before submitting it. It will not display after submission until reviewed. So, please, do not resubmit.
Formatting: If using any code snippets place them inside code tags (e.g., 'code') using double single quotes (') before and after to keep them readable.
Be Kind: This is a community effort. Please keep feedback constructive and on topic.
~~DISCUSSION~~